The pinnacle of Sabfoil Windsurf Racing Division: V1071000 is designed in collaboration with World Champion Luuc Van Opzeeland and is built to be one of the highest performing windsurf race foils.
Every part of this foil is designed to reduce drag and produce the best hydrodynamic performance. Each detail is precisely tuned to maximize the highest speed/angle ratio while avoiding ventilation.
This kit provides superior stability and control even at the highest speed.
The use of high modulus and high resistance carbon has been optimized by virtual prototyping and physical testing to ensure the highest rigidity and torsion resistance.
Microfractures on the mast caused by accidental collisions or by freestyle use of this race-specific foil can cause the mast to break suddenly. For this reason, we recommend to avoid jumps and to check the mast carefully after a collision.
|Mast Height||1050 mm|
|Front Wing Span||1000 mm|
|Front Wing Root Chord||135 mm|
|Front Wing Aspect Ratio||10,1
|Front Wing Surface||987 cm2|
|Stabilizer Span||400 mm|
|Stabilizer Root Chord||64 mm|
|Stabilizer Aspect Ratio||7.73|
|Stabilizer Surface||207 cm2|
|Mast Weight||2,4 kg|
|Board Connection||Deep Tuttle|
|Fuselage Length||1150 mm|
|Kit Weight||5239 g +/- 5%|
|MW107 - Mast Vento 107 Carbon 12K - Deep Tuttle||1|
|W1000 - Front Wing 1000 Race/Windsurf/Wing/Sup - 987 cm2||1|
|S399 - Stabilizer 399 mm Kite/Wind/Surf||1|
|FW1150 - Fuselage 1150 for Carbon mast||1|
|MH107 - 2 x Flat Head Screws Torx M6x16||1|
|MH109 - 3 x Flat Head Screws Torx M6x25||1|
|MH131 - 4 x M6x20 and 4 x M6x25 Socket Head Cap Screws and washer for fuselage FW1150||1|
|Torx, Hex tip, Grease||1|
|MHW060 - Shims -0,5°/-1°/-1,5°/-2°/-2,5°/-3°||1|